Posted on

I’m moving back to Kenya, what car should I buy?

Hi Baraza,
Your column is like a special motoring university. Kudos! I am moving back to Kenya from the UK at the end of the year and intend to reward myself with a car after my studies.

I have identified the following used cars based on how much I want to spend (both cost here and tax in Kenya), age, and appeal: Toyota Avensis (most abundant but with unappealing dashboard), Mazda6, Vauxhall Insignia (gorgeous), Volkswagen Passat, Honda Accord, Dodge Caliber, Chevrolet Epica, Hyundai Sonata, and Tucson.

I want to spend about Sh10,000 a month on the car and do a maximum of 100 kilometres a week. Which would you recommend for consideration in terms of fuel efficiency, spares availability, Kenyan roads, my monthly budget, and being my first self-owned car?

NB: I do try to read the Daily Nation every day, but sometimes, as a student, I am sure you understand that the schedule just throws one off. So kindly copy me the response on e-mail.

Kind regards,

James.

Leave the Insignia, the Caliber, and the Epica alone if you want any form of confident support from this side. I can bet a large number of people do not even know what those are, let alone have the know-how to fix them when the need arises.

The Sonata, Accord, Passat, and Avensis are a better choice, but the problem is that you do not specify what model year these vehicles are.

Only the Passat will get support for the past three models, the Sonata and the Accord have only recently been formally introduced and it is my guess that current and future models will receive priority in support terms from the respective franchises, while past models may be overlooked.

If you choose backstreet Mr Fix-Its, well, good luck. My pick here would be the Passat B6 or B7. Not the B5, though. If you want to buy the Tucson, get the new one. The old one looked funny.

Hi Baraza,

Thanks for the informative articles. Please help me understand one issue. What is the relationship between the engine size (cc) and the gearbox? In other words, if I was able to put a jet engine in a tractor, would the tractor out-pace most cars on the road, not withstanding the aerodynamics?

Regards,

Ronald

With a jet engine on a tractor, you would not need a gearbox. All you would need is a reliable steering system and very good brakes (an added parachute has been found to be invaluable when stopping jet-powered ground vehicles).

This is because the jet engine works by pushing the entire vehicle using Newton’s Third Law of Motion: for every action there is a reaction equal in magnitude and opposite in direction. So the plasma stream of hot gases exiting the rear of the jet engine creates a force that pushes the jet/tractor in the opposite direction, enabling it to go forward.

Motor vehicle engines, the regular ones rather, exert force through the wheels of the vehicle through a transmission system of sorts. The whole setup is called the power-train and usually incorporates drive-shafts, transmissions, gearboxes, the engine itself, and the tyres. This is where you need a gearbox because the torque developed by the engine sometimes needs multiplication when the load increases.

Now, between the engine size and gearbox, there is definitely a relationship but the variables involved are numerous. The power and torque curves of the engine are the primary determinants of the ratios one uses in the gearbox.

Then there is application: are you designing a gearbox for a tractor that pulls tree stumps out of the ground or is the gearbox for a road car that is designed to break speed records? Engine size may or may not apply.

Here is an example American cars have very huge engines, typically in the 5.7-litre range. But these massive engines are built to drive everywhere at 88km/h while spooling lazily and effortlessly, sometimes towing a caravan or a speedboat if the 88 km/h drive is headed towards a holiday destination.

Then take a McLaren Mercedes SLR sports car, 5.5 litres (with a supercharger), which is smaller than the American equivalent, but will do almost four times the speed. Clearly, the gear ratios are dissimilar. At 88 km/h the SLR is going to be still in first gear.

Application and engine output characteristics (torque and power curves) directly determine the gear ratios in a gearbox more than engine size itself does. It is just that engine size again determines the torque and power, if everything else is kept constant, so that is how they are related. Indirectly.

Hi Baraza,

I would like you to shed some light on the interaction between brake horse power, torque, and engine rating. I am curious as to why a 2,000cc Evolution MR produces 400bhp yet a much bigger Mercedes Actros (2546) does 460bhp.

If a 2.0-litre engine can develop such a high HP, why do Mercedes, Ferrari, Lamborghini, and other super cars go to the length of making behemoth engines of 6,300cc and above that produce only 500bhp?

I once raced a Mercedes CLS 3500 CC (270bhp)) in a VW Golf GTI 2,000cc (200 bhp) and won. What do you attribute this to? Torque? A Range Rover Sport (2.7-litre) with 188bhp and 324.5lbs of torque easily wins against a GTI.

Thanks,

Anthony Mugo.

Brake horse power is the power of the car developed by an engine before losses occur in the transmission and peripherals (alternators, pumps, mufflers). It is not a very accurate way of determining the outright performance of a car. Wheel horse power is a much better indicator.

Torque is force applied over a certain distance, but to make it clear, it is what GETS you going. The effort needed to move a certain load, and determines the magnitude of load one can move as opposed to power, which is what keeps you going, the rate at which the force is applied and determines the absolute speed at which one can move.

For engine rating, see brake horse power. Now, the power output of an engine is directly related to the torque. An engine develops torque naturally. The power output is determined by how high that torque can be carried before the torque curve drops off.

That is the amount of rpm the engine keeps pulling with maximum force. An Actros develops massive torque, say 3000Nm or even more, but it revs to only 2500rpm. So power output is pegged at 460hp (this is still a lot, by the way).

The Evo, on the other hand, makes about 550Nm, but revs to 8,000rpm, hence the power is higher. I know of an Evo that makes, or made 820whp WITH A SLIPPING CLUTCH, but this particular Evo could rev to a stratospheric 9,000rpm.

Big engines with low-ish power outputs are unstressed and last longer. That is in direct contrast to small, high-strung engines with high outputs. They do not go far. That is why race cars go an engine a race.

About that VW vs CLS thing you are talking about: either the CLS driver was inept or he was concerned about wrecking his expensive saloon racing a hatchback. If he had chosen to open the taps on that CLS, you would have been blown out of the water.

Hello Baraza,

I am a fan of your articles and would like to figure out the problem with my car. It is Toyota RunX VVTi, a 2003 model that I have been driving for two years now. However, I started experiencing a problem when I changed tyres from the original ones (imported with the car).

I drive on two new front tyres and the original ones at the rear. The car vibration increases when the speed exceeds 80km/hr. The vibrations reduces when the new tyres are taken to the rear. I have done wheel balancing/alignment and the situation has not improved. What could be the problem?

Okomoli B.O.

You could be having directional tyres. Switching them front to back reduces the vibrations, right? So how about you switch them right to left? Some tyres are designed for use on one side of the car only, so placing them on the “wrong” side of the car creates an unpleasant driving experience.

I would also like to know what is the brand and size of the new tyres.

Hi,

My father has an S320 diesel import from UK registered in 2008. When you hit the 120kph mark, a hazard light appears on the speedometer. It says the ABS is not functioning. We have taken it to DT Dobie for diagnosis twice but it keeps coming back on and they keep charging him every time. He does not mind this, but I do. Do you have any idea what the issue is?

For a few months my father did not drive the car but the on-board computer says the car was due to be serviced, considering it has only travelled around 1,000km. Will anything happen to the car if he keeps driving it?

On a final note, when my father was importing the car, many of his friends, including DT Dobie staff, told him not to buy a diesel Mercedes, or a small diesel car for that matter, because the diesel in Kenya is not as pure as that in Europe. Is this true? For the past two years the car has been running smoothly, I think it is a myth.

Regards,

Victor.

Mercedes cars, more so the top-of-the-range S Class uber-saloon, cannot and should not be fixed by amateurs, driveway grease monkeys, or backstreet opportunists. Only approved dealers and franchises are supposed to handle the car.

So this is my advice: Go back to DT Dobie. Ask them to fix the car, if they cannot, let them be honest enough to say so. If they attempt to fix it and the results are unsatisfactory, inform them that you will not be paying, because why pay when the service you requested has not been delivered?

I do not know what usually happens when your Benz tells you it is due for service and you do not service it. Jeremy Clarkson of BBC Top Gear jokes a lot about that warning, but he has never said what will actually happen to the car. He just says “kooler, sree veeks” (three weeks in the cooler a.k.a jail), which is not very helpful. So I do not know. Service your car when it asks you to. It knows best when it needs attention.

The diesel allegation is mostly true, especially when it applies to Mercedes cars. But this is usually for small engines. The S320 CDI does not have a small engine, this is the same engine used in the ML320 CDI, a 3.2l 6-cylinder engine. It should not be much of a problem

Dear Baraza,

Kindly help me to choose between the new Honda CRV (2006-2007 model), Toyota RAV 4, and Mitsubishi Outlander in terms of price, availability of spare parts, durability/dependability, and fuel consumption.
Thanks,

Moses Mwanjala.

This is what my research yielded:

Price: I visited that website I keep mentioning, autobazaar.co.ke, and this is what I found. A 2007 CRV that costs Sh1.83 million on the lower side, and a 2006 (eh??) CRV that costs Sh2.5 million on the upper side. Actually there were two of these.

Toyota RAV4: As low as Sh1.49 million for a 2006 car, as high as Sh2.87 million for another car of similar vintage. Most were going for Sh2.5 million. Mitsubishi Outlander: As low as Sh2 million, as high as Sh 2.1 million. Most of them had “Contact Seller” on the price tag, and contact them you will. Autobazaar.co.ke not only gives you the cars available, there is also a map below the search results that shows you exactly where the car is at that moment. Nifty, eh?

Availability of spares: I did not do research on this because none of these cars is limited edition or custom made. They are mass produced by Japan. The answer to this is fairly obvious.

Reliability and durability: Honda’s V-TEC line of engines are nicknamed “Terminator” by foreign journalists because they never suffer engine failure. This is unlike Toyota’s D4 and Mitsubishi’s GDI, which are fickle by comparison. The RAV4 also seems to age a bit fast compared to the Honda. The Outlanders I have seen are mostly pampered vehicles, so it is hard to tell what would happen if one gets abused.

Fuel economy: This is where Toyota and Mitsubishi get their revenge. D4 and GDI yield astonishing economy figures, the D4 more so. But would you rather save fuel or suffer engine failure?

Dear Baraza,

As we speak, I am stuck between a rock and a hard place because I am planning to buy an expedition vehicle (something tough enough to withstand the harsh off-road world).

I have been looking at expedition vehicle videos and I realised that most of them go for vehicles with solid axles (Land Rover Defender, Toyota Landcruiser 70 series) as compared to independent suspension (Discovery 3, Hummer).

a) Why is this? b) What would you advise me to buy? Thanks.

Sunus.

First, solid axles are tougher, more robust, simpler in design, and consequently cheaper to buy, instal, and repair. In actual terms, you are better off with independent suspension because this helps in wheel articulation, increases stroke room per wheel (up and down travel), and helps keep the car balanced even in extreme situations.

However, independent suspensions are a bit more delicate, so they break easily and they cost more. So it is wiser to just grin and bear it with the solid axles if you are going to participate in the Rhino Charge.

Second, it depends on the extremity of your off-road activities and the wherewithal available to you. I could suggest you buy a Series III Land Rover 109 and raise its suspension only to find out I am talking to a billionaire who rarely goes over anything taller than a tree stump and is better off in the 2013 Range Rover.

Then again I may suggest you buy the Landcruiser 200 V8 but it turns out Sh15 million is too much money to splash on a new off-road car, and your budget can only stretch to a clapped out J70 pick-up from a police auction. So, how extreme is your off-roading and how much are you ready to spend on your off-roader?

Posted on

Avoid running on ‘E’ all the time, just fill up

Hi Baraza,

I have a well-maintained Mitsubishi Lancer Cedia, 1500cc, 2003 model. I often drive it when the low-fuel light is on and the car covers many kilometres before refuelling.

What are the implications of driving a car when this light is on for a long period? Another issue is that, whenever, I top up with fuel worth about Sh500, the light goes on immediately, even before I am out of the petrol station. Why? How effective is this vehicle in terms of fuel consumption?

I would also like you to generally comment about Mitsubishi Lancers as I have found this car to be much nicer compared to the Subaru Legacy I had before.

Frederick.

How many kilometres does your Lancer cover from the moment the light comes on?

If it is more than 100, then you might have a special car in your care: either the fuel consumption is extraordinary or the electricals are playing with your mind.

The biggest implication for running a car with the fuel light constantly on is that you might run out of fuel far from a filling station and you would go to a lot of trouble getting it running again.

Most cars indicate ‘empty’ or have the light shining when there is about five to 10 litres of fuel remaining.

So, if your tank was very nearly empty (say, had less than 100ml of petrol left) and you put in Sh500 worth of fuel (given that petrol is going for about Sh120 a litre, that is about four litres of fuel ), then what you have in your tank is still below the empty mark. Fill your tank if you can.

The Cedia is very economical, even in the 1.5 litre form, especially if the car has a GDI (Gasoline Direct Injection, similar to D4 in Toyota) engine, but to harness the maximum effect from GDI, maintain steady throttle openings (a light constant pressure on the accelerator) as the GDI system reverts to the normal stoichiometric charge ratio whenever the throttle opening is adjusted.

Let me get my hands on a Cedia and I will definitely give you something worth reading.

—————-

Hi Baraza,

Let us separate two warring factions here: the D4 engine haters (a larger group) and those who praise it.

First things first; is the D4 engine different from a VVT-i one? Or, if I may shoot more straight, can D4 technology be used in a VVT-i engine?

I have heard things that make touching the engine sinful — it is significantly thirstier than the others and requires you to talk to the HR department for a loan to repair it once it goes nuts.

Please clarify whether all these things are true.

Finally, please confirm whether the new car models, specifically the Toyota Premio and the RAV4, can come with the D4 engine.

And is it possible for the D4 label not to appear on the engine cover?

Nyaga.

The D4 technology was supposed to be the motoring industry’s second-coming, but Toyota rushed it and. because of that, it does have a few weaknesses. It is my understanding that they are back to the drawing board over this.

D4 and VVT-i are two different technologies: one concerns fuel delivery (D4, Direct Injection 4-stroke cycle) while the other concerns valve timing (VVT-i, variable valve timing with intelligence). It is, therefore, possible to have both on the same engine.

Why would a D4 engine be thirstier than others?

The technology is supposed to improve fuel consumption, not make it worse. I have driven some cars (Toyota Vista the most) with D4 and if carefully driven, the 1.8 litre would return astonishing mileage.

Toyota Premios and RAV4s do come with D4 engines for some trim levels.

Most D4-equipped cars have the logo plastered on the engine cover. I have not seen one that did not, but this is not to say that it is impossible. I just have not seen one yet.

—————–

Hi Baraza,

I always look forward to reading your articles even though I do not have a car yet. However, I’m planning to buy one in January and I needed you advice.

There is this car I see, Toyota Lexus/Altezza salon. I have not seen many on our roads, though, but I admire its aesthetics and I’m planning to acquire one.

Please advise me on its performance, engine size, handling, fuel consumption, speed, and spare parts availability. Your advice will be much appreciated.

First off, there is no such thing as a Toyota Lexus. Those are two different brands under the same umbrella. You either have a Toyota or you have a Lexus.

The car you are referring to is the Toyota Altezza/Lexus IS 200. Although you claim not to have seen many on our roads, believe me they are there, and in increasing numbers.

Answering your queries in order of presentation: damn-near excellent (in the 3 Series league, possibly faster); it is a 2.0 litre (the IS 250 that is strictly USDM is a 2.5); the handling is sublime, courtesy of the rear drive chassis; fuel consumption is passable under normal driving conditions, but it gets a bit thirsty when pushed; it is fast with good acceleration (clocks 100 km/h in less than 9 seconds); I am not too sure about spares but take heart in the fact that, with increasing numbers, their availability will improve.

—————-

Hi Baraza,

I am interested in purchasing a Mitsubishi Pajero. I have already identified one, a 1998 Inter-cooler Turbo which looks fairly good and is going for Sh700,000. What do you think, is the price fair? How come a Toyota Landcruiser of the same age goes for almost double this price?

For a Pajero of this age and make, what mechanical problems are likely to plague it? Are spare parts available and is it a guzzler?

Robert

The biggest issue would be poor diesel combustion accompanied by a lack of power, so check for a smoky exhaust.

A good service/overhaul should put it back in order. Also, take it to a specialist to have the turbo looked at since most people do not know how to maintain turbodiesel cars.

It is not what you would call a guzzler, given its size and class. The price seems a bit optimistic but a thorough check should reveal whether or not you are going to pay more when fixing it.

Toyota SUVs are generally expensive to begin with, and their reputation for hardiness and reliability means they will not lose value fast.

I know of Landcruisers from the late 1990s that still have an asking price well north of Sh2.5 million.

—————-

Dear Baraza,

I have two issues I need your wise counsel on:

1. We own a Toyota Noah 2000 model, 2184 cc, diesel. The car’s timing belt broke about four weeks ago. We got a mechanic to fix it and that is when the woes started. At first, he could not get the part and had to have it imported. Later the sleeves and pistons had to be replaced. The car is now working but it is smoking like a jiko, has a hard start, and shakes when idling. What could the mechanic have done wrong and how can we correct this? Is it worth it to continue fixing this engine or should we jut buy a new one? The mechanic reckons that the smoking will go away after three days.

2. If options run out for us, we are thinking of getting a new car but would like your advice on imports from Britain as compared to Japan. What would you recommend for a family of four? We would like a small 4×4 that can go to shags and also do local running in town. I had thought of a Land Rover Freelander but have no idea how the car performs. Your advice will be highly appreciated.

The smoking means a lot of things could be wrong. The valve seals, the piston rings, or even the entire cylinder head could be leaking. The hard start could be caused by faulty electricals or poor fuel delivery, and the shaking during idle means that one or more of your spark plugs could be giving up. That also ties in with the hard start.

It might be easier to just get a new engine, especially nowadays when a new one costs as little as Sh30,000 (expect to pay up to Sh70,000 for your Noah engine, but it will be a good investment in the long run). And next time, go to a proper garage that has a reputation to stake if they ruin your car.

The Freelander is good, but get a late model first-generation car, preferably diesel. The very first Freelander cars off the assembly line had a litany of problems that you do not want to deal with, believe me.

Or you could try the Nissan X-Trail, also in diesel, although even the petrol is not so bad. Avoid automatic for the X-Trail if you can. RAV4s are expensive and a touch thirstier than the X-Trail, while the iO is delicate and wobbly on the highway.

I have not visited the import scene that much to make a declaration which is better between Britain and Japan, but, as a personal preference, I would go Jap.

——————

Hi Baraza,

I have a Toyota Premio D4 manufactured in 2000. The body of the car and the mechanicals are as good as new.

However, while idling, the rev sometimes just shoots up even to 2000 without any obvious cause, hence seriously increasing fuel consumption. The interesting thing is that on some days it returns to normal by itself.

My mechanic appears lost on this. I have replaced the whole throttle body, including the sensors, but there is still no change. One mechanic thought there is a damaged pipe that sucks in air but he cannot say which one. I have tried a number of reputable garages but none can tell where the problem lies, but they insist there is a sensor somewhere with a problem.

Kindly let me know if there is a mechanic who can sort it out even if privately. I know D4 engines have issues but I believe there must be a way out.

Remove the IAC (idle air control) valve and clean it then put it back. Disconnect the battery for about five minutes to try and flush the ECU memory (if possible), but first try and use a scan tool (OBD II device).

Other causes can include: vacuum leaks, a build-up of contaminates obstructing movement of the IAC valve, a sticking or binding EGR valve or throttle linkage, an improperly adjusted or a sticking throttle position sensor, AC leakage from the alternator into the electrical system, fuel injector leakage, the evaporative control system, positive crankcase ventilation system, air leaks into the intake system, exhaust system leaks or a restriction, a contaminated oxygen sensor or an erratic sensor signal, and other related sensors.

—————–

Hi Baraza

I would like to invest in the matatu business here in Kenya but I do not know which bus to choose. I want a 51-seater, either Isuzu FRR, Nissan MKB 210, or Mitsubishi. I am looking at durability, fuel economy, and ease of maintenance.

I have heard from a number of people that Isuzu is durable and easy to maintain while the Nissan is not that durable.

I also do not understand why the Isuzu FRR has a bigger engine (8200cc) than the Nissan MK210 (6900cc), yet the two vehicles yield the same horse power.

Does the Isuzu consume more fuel due to the bigger engine? Also, why is FH the most popular and fastest selling truck in Kenya?

Mwangi.

The MKB 210 is turbocharged and intercooled, that is why it yields almost the same power as the FRR (180 hp vs 187). The FH is popular due to its power (more than both MKB and FRR, at about 215 hp) and durability (the vehicle is quite hardy).

I am not sure about their fuel consumption yet, I will check with some industry players and get back to you.

————–

Hi,

I have a few questions concerning my Lexus RX330.

First, how can I change the language settings on the DVD screen, and where is the control DVD located?

The other problem is that when I attain speeds of between 60 to 80 kph, it vibrates, but when I stop accelerating it stops. I have tried all manner of wheel balancing and alignment but in vain.

Lastly, is there a DVD with Kenyan maps and can it work in my car? I hear something about PAL and NTSC, but I’m not familiar with these. Please help.

A tuning outfit called Auto Art says they can do Japanese-English translations for those telematics systems. Find them and ask. I do not know where the control DVD is located (or what it is, for that matter).

The vibrating could be caused by worn out engine or transmission mounts. Lexus were known to have installed active engine mounts on some cars (these mounts vibrate at the same frequency but half a wavelength out of sync with the engine vibration itself to cancel out the engine vibrations, which is why Lexus cars are so smooth).

I do not know who has the DVD with Kenyan maps, but I have seen cars with Nairobi sat-nav, and CMC boast that their Discovery 4 has a Kenyan road map sat-nav that includes game parks.

—————

Dear Baraza,

I live in the UK and read your article touching on V-Power fuel and I just wanted to make a comment.

I use a B6 VW Passat diesel and was recently introduced to V-Power diesel by Shell.

This is what I noticed: V-Power diesel is made from a different base stock. Instead of being refined from crude, a percentage will consist of liquified gas and is meant to be a “purer” fuel with cleaner burning. Whether it is worth the price premium is a point for endless discussion.

For what it is worth, I have tried every type of diesel fuel here (BP Ultimate Diesel, Total Excelium) plus a range of additives, and none has made any measurable, repeatable difference in performance or economy. All diesel fuel on sale from reputable UK forecourts meets or exceeds the EN590 standard that car manufacturers specify.

Musau.

Thank you Musau. When V-Power was first introduced back here in the motherland, Shell were careful to point out that it will not turn your Corolla estate into a Ferrari (in spite of using images of Ferrari cars to popularise the fuel).

It is more of a cleaning agent than a high-power output fuel. With the increased octane rating, it can be used in performance cars with high compression engines.

It will not, repeat NOT, increase the performance of your car or the fuel economy, but it will clean the engine of deposits in and around the combustion chamber.

—————

Hi Baraza,

I have a Subaru Forester 2003 Turbo. The turbo makes a whining sound at 5,000rpm while the boost has a slight delay. The sound can be heard from the cockpit. I have checked all the hoses. Is the turbo going? I am using V-Power and fully synthetic oil (Quartz 9000).

The car could be suffering from boost leak, which means that somewhere in the turbo or intake, there is an area where the air (boost) is escaping.

Typically, a boost leak is caused by a loose or bad seal or cracked housing. When there is a boost leak, the turbo will be able to generate boost, but it may not be able to hold it at a constant level, and pressure will drop off proportionally to the size of the leak.

The funny whining noise is a cyclic noise caused by unstable compressor operating conditions known as compressor surge.

This aerodynamic instability is the most noticeable during a rapid lift of the throttle following operation at full boost, which it may have in your case since you talk of running at 5,000rpm.

—————

Hi,

I have this car that I call an animal because I was driving on a highway and did not realise that I was doing 160km/h. It is an 1800cc Fielder S. Kindly advise on the most fuel-economic speed on highways.

I also wish to know whether switching the lever to neutral and back in attempt to save fuel, in an auto, can cause damage to the gearbox. Thanks.

The most economical speed depends mostly on engine capacity, but it lies between 90 km/h for small-engine cars and about 125–130 km/h for cars with large engines (3.5 litre plus). Shave off about 20 km/h each for diesel powered cars. You, however, need to have your windows shut and keep a steady throttle foot.

I had done an article on driving in neutral and declared it redundant in the face of current technology.

You are better off leaving the car in gear and getting off the throttle completely when going downhill.

Driving in neutral does not damage the gearbox but there is a big risk of you getting the shift wrong, like if you accidentally bump the lever up into R instead of down into D.

——————–

Hi JM,

Your recent comments on the value of spacers needs a reply. The level of ground clearance of a vehicle when loaded is a vital and too-often-ignored factor when making a purchase. Many imported vehicles have soft suspensions and, even with small loads, cannot negotiate the ill-designed speed bumps without making contact.

While spacers may reduce the visual appearance of your favourite vehicle, it may be better for you to get something more practical for everyday use.

During the days of the 305, 404, and 504, the Peugeot factory spent a day every three or four months making these models for the African market with over 100 modifications, which included stiffer springs and increased ground clearance, and the 305 I owned never grounded when loaded.

The rules on importation of cars should be changed to include an established minimum ground clearance when loaded with the recommended load.

Muckle.

Thank you so much, Muckle. I did discuss tropicalisation and the import market in my first two articles of 2011, but, as has become the norm, accusations of being on the payroll of some local franchise flew left and right. It is difficult to help people when they do not want to be helped.

That was the beauty of the Peugeot cars of yore: they were built to a standard and the local driving conditions were taken into consideration.

If it was up to me, I would turn the import market into a forbidding venture for all but the most determined. It is time to get people back into proper cars and have them stop complaining about ruined suspensions, incompatible fuel systems, and other such problems.

—————

Dear Sir/Madam,

Recently, I came across an article on toxic cars from Japan. It seems that following the last nuclear disaster in Japan, unscrupulous used-car dealers and exporters are playing around with re-registration papers and processes in order to sell and export cars that are unsuitable for use, cars condemned by the Japanese government as having too high a radiation reading, hence unfit for use.

I do believe our “tough” business men and women will find a way of exporting these condemned units to unsuspecting consumers in Kenya and wherever RHD cars are used. If I recall correctly, after the Chernobyl nuclear fall-out, some pints of condemned milk did find their way into the local market.

Daniel.

Dear Sir/Madam? Seriously? I do not want to sound like a pompous, narcissistic, self-centred person here, but did you not see that the picture in the paper was that of a man?

That aside, you seem to be on to something here. If our government was serious, they would acquire a set of Geiger-Muller tubes and deploy them at the port to intercept any radioactive material that would otherwise be passed to the mwananchi.